DAP VPA-250
250W/100 Volt Power Amplifier
Features:
Two microphone inputs, two auxiliary inputs and two AUX out for line.
Transformer isolated 240V, 110V, 70V and 4-16 Ohms speaker outputs.
Muting function.
Individual volume control and master volume control.
Low and high tone control
Output circuit shorting protection & alarm.
Chime output.
Frontpanel:
Power switch.
Power indicator LED
LED level meter
Clip
Z1 switch
Z2 switch
Z3 switch
Z4 switch
Master volume control
Treble control
Bass control
AUX 2 volume control
AUX 1 volume control
MIC 2 volume control
MIC 1 volume control
MIC 2 input jack
MIC 1 input jack
Chime rest
Chime:
To further enhance the system a chime facility can be added as an option, the chime output can be activated by any input.
250W/100 Volt Power Amplifier
Features:
Two microphone inputs, two auxiliary inputs and two AUX out for line.
Transformer isolated 240V, 110V, 70V and 4-16 Ohms speaker outputs.
Muting function.
Individual volume control and master volume control.
Low and high tone control
Output circuit shorting protection & alarm.
Chime output.
Frontpanel:
Power switch.
Power indicator LED
LED level meter
Clip
Z1 switch
Z2 switch
Z3 switch
Z4 switch
Master volume control
Treble control
Bass control
AUX 2 volume control
AUX 1 volume control
MIC 2 volume control
MIC 1 volume control
MIC 2 input jack
MIC 1 input jack
Chime rest
Chime:
To further enhance the system a chime facility can be added as an option, the chime output can be activated by any input.
| Model | VPA-60 VPA-150 VPA-250 |
| Output: 60W 150W 250W | |
| Output regulation | Less than 3 dB, no load to full load |
| Speaker output: Balanced 4-16 Ohm, 70V, 110V, 240V | |
| AUX output: 600 Ohm 1V (0 dBV) | |
| Inputs: Mic 1,2/600 Ohm, 2.0 mV (-54 dBV), unbalanced | |
| AUX 1,2/10 kilo-Ohm, 250 mV (-10 dBV), unbalanced | |
| Freq. response 100 Hz-16 kHz | |
| Distortion: Less than 0.1% at 1 kHz, 1/3 rated power | |
| Signal to noise ratio | Microphone 1,2 66 dB |
| AUX 1,2 70 dB | |
| Tone | Bass: +- 10 dB at 100 Hz |
| Treble: + -10 dB at 10 Hz | |
| Protection: AC fuse; DC voltage, overload and short circuit. | |
| Muting function: Mic 1 overrides, other input signals with 0~-30 dB attenuation. | |
| Power Requirements: AC 220~240V/50~60 Hz | |
| Power Consumption: 100W 200W 320W | |
| Dimensions | 483 x 400 x 89 mm |
| Gross Weight | 16 kg 20 kg 24 kg |
Er zijn nog geen beoordelingen van dit product